| |
 Audi A3
Audi A4
Audi TT
Mercedes SLK
Mercedes CLK
Mercedes SL
Porsche 911
Volkswagen EOS
E-Certificate
Safety
Advice
F.A.Q.
|
|
Audi A4 (8H)
Does it bother you that the button to operate the roof on
your Audi A4 (8H) Cabrio is so awkward to handle? With our Cabrio-Plus module,
your A4 8H (B6/B7) gains several additional features and will really stand out
when on the move!
The most important features of the Pro version are:
Detailled functionality:
- Roof can be operated with the remote key control. After
pressing the open or close button on the vehicle remote twice, the roofs starts
moving. With this, you can open the roof on the way to your car or you can
close it if you are inside and it starts to rain. A guaranteed show effect!
- A quick touch of the roof button opens or closes the roof completely.
Holding the roof button for the entire time the roof is in motion is no longer
needed. Simply press the button once and release to start movement of the
roof. A short push in the opposite direction will interrupt the operation
if you need to stop for any reason.
- Open and close while moving. You can open and close the
roof while driving up to speeds of
25mph . No more worries about running out of time at a traffic light to raise or
lower the top. With this module, you can start driving while the roof finishes
it's movement. You are no longer a traffic obstacle while you are waiting
and people will look with jealousy as your drive away with the top completing
it's motion! If it starts to rain and there is no place to stop the car, you
can easily close the roof while driving at city speeds.
- For safetly reasons, driving faster than the maximum speed stops the movement
of the roof. If you reduce speed within the next ten seconds, the roof operation
will continue automatically.
- All functions can be enabled or disabled with the mirror adjustment joystick.
Pushing the joystick for 5 seconds in one direction sets up the configuration
of a function and a flashing symbol in the tacho receipts the change. If you
don´t want to use all functions, you can disable them seperately.
- As we develop new functionality in the future, you have the ability to get
a firmware update so you can always have the latest features.
- Compared to other modules, the standby power demand of the Cabrio-Plus is
only 0,03mA for each of the two Modules. This means that it spares your battery
and ensures that your cabrio will start after a holiday or period of bad weather.
Cabrio-Plus consists of two Modules; the "Outdoor"
module installs inside the driver door and the "Indoor" module fits
behind the side panel for the rear seats. Our photo-rich, detailed manual shows
exactly which steps are necessary to install the module. Nothing else is necessary
and after installation your A4 cabrio allows a lot of convenient extra features.
The Cabrio-Plus Module is a German product and was carefully
developed to avoid disruption of other controllers in the CAN-Bus network. Produced also
in Germany, it has a valid E-certificate allowing trouble-free usage within the ECE.
| Feature |
Indoor II |
Outdoor |
Pro |
| 1. Push function |
 |
|
|
| 2. Remote controllable |
|
|
|
| 3. Operate while driving |
|
|
|
| Price |
$159.- |
$159.- |
$279.- |
The new functionality of your A4 cabrio is not only more convenient, it will really
attract positive attention.
Information regarding the standby power demand:
In the standby mode, each device consumes a small amount of power. Even complex
vehicle controllers should not need more than 2,0mA to avoid an empty battery after
a long standing time, e.g. after a holiday. It is even more important for cabrios,
as these kinds of vehicles are sometimes not used in cold weather periods. We do
not recommend installing electronic modules with a standby demand of more than
0,5mA. Due to quality engineering and manufacturing, Cabrio-Plus Modules need less
than 0,03mA.
|
|
|
